HAEGER Cool Boom SP-40W.002A Instrucciones De Uso página 5

English
Switching Mode & TWS [ ]
Short press the button to switch the playback source: Bluetooth, AUX, USB, TF card
(microSD).
Ambient Light [ ]
The BT speaker is equipped with ambient light effects in the speaker area. To change the
light effect, short press the button. To disable the ambient light long press this button.
Bass boost [ ]
Short press to enhance the bass effect.
Power button [ ]
Long press to power on/off. (Press and hold for 10 seconds to restore factory settings).
Play/Pause [ ]
Short press to play/pause. When playing a recording file, long press the play button to
delete the recording. When playing music, long press the play button to quickly enter the
recording file playback. In the Bluetooth mode, long press the play button to directly
disconnect the Bluetooth connection.
AUX IN [ ]
The speaker is equipped with a 3.5mm jack. Your device can be connected to the BT
speaker via the supplied audio jack. First connect the audio plug to your device and then
to the speaker's jack. The sound reproduced from the speaker using AUX-IN mode will be
transmitted in mono.
Please note: before connecting your device and speaker, make sure that the output signal
from your device is at the minimum level (minimum output volume). This will prevent the
speaker from damage. When the audio cable is connected, the speaker does not meet the
water ingression protection class.
Note: In this mode, not all functions of the speaker are available. The Bluetooth function
is not active if the audio jack is connected to the speaker.
Using a MicroSD card or USB stick
Insert a microSD card to the microSD card slot or the USB stick to the USB input port. (The
max. workable capacity is 64GB, if more it is more than cannot work)
The contents will start playing automatically.
Attention: Due to a number of devices on the market, compatibility and playback support
are not guaranteed for all media. The memory devices you want to connect should be
tested in advance and/or formatted as FAT32 file format. The playback of protected media,
files or content stored inside them may fail.
The USB input port does not have a power bank function – it is not used to charge mobile
devices.
3