1
Translation of the original
en
operating instructions
Ensure you read all of the instructions
on safety and proper use
Failure to observe these instructions
on safety and proper use could lead to
electric shocks, fires and/or serious injury.
These operating instructions must be kept for
later use.
Table of Contents
1. General information . . . . . . . . . . . . . . . . . . . . . 7
1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.3 Safety instructions and warnings. . . . . . . . . . 7
1.4 Key to pictograms . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.5 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.6 Scope of supply. . . . . . . . . . . . . . . . . . . . . . . . . . . 85
2. Standard operation . . . . . . . . . . . . . . . . . . . . . 85
2.1 Opening magazine . . . . . . . . . . . . . . . . . . . . . . . 85
2.2 Inserting fasteners . . . . . . . . . . . . . . . . . . . . . . . 86
2.3 Adjusting impact power . . . . . . . . . . . . . . . . . . 86
2.4 Parallel guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
2.5 Releasing the trigger, firing a shot . . . . . . . . 87
3. Maintenance/troubleshooting . . . . . . . . . . 88
3.1 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 88
1.1
Intended use
This device is used to attach cardboard, insulat-
ing material, textiles, films, leather, wood and
other similar non-brittle materials to wooden or
wood-like surfaces. Please take care to ensure the
workpiece is of a suitable size.
The device must only be used for the purpose
intended by the manufacturer.
Safety instructions and
1.2
warnings
This device has been constructed and tested in
accordance with all currently applicable technical
regulations. It left the factory in perfect condition
in terms of safety and reliability. To keep it in such
a condition and to ensure risk-free operation, the
user must observe the instructions and warnings
given in the operating instructions.
• The device is not suitable for industrial use.
• The device is not a toy and must be kept away
from children at all times.
• Check the device to ensure that it is in good con-
dition any time before being put into operation.
• If it must be assumed that safe operation is no
longer possible, take the unit out of operation
and secure it against accidental use.
• Do not pull on the cable or use the cable to carry
the device. Do not use the device if the power
cable is damaged.
• Manipulation such as the removal or blockage
of parts on the device is impermissible and will
void the guarantee.
• Before switching on, ensure that the power
source does not exceed the permissible values
specified in the technical data.
• Do not point the device at yourself, other per-
sons or animals.
• Use only original NOVUS fasteners.
• There is a risk of injury from the tips and edges
of fasteners placed in the magazine, not fully
driven in or jamming following a magazine
fault.
• The device is only designed for short-term use.
The device must therefore be allowed to cool
down every 30 minutes when fired at a rate of
20 shots/min. in single-stroke mode.
• Protect against moisture and wetness.
J-151
7 / 92