HyperMotion CLIMBER 6FT Manual De Instrucciones página 23

EN 22
Step 5:
Take 2 tubes (part A) and 1 tube (part B).
Connect them with one bolt (part E), one nut (part K), and one washer (part H).
The order of connecting the pipes must be as shown in the figure.
First, put the washer on the bolt. Then insert the bolt from the inside through Tube # 1, Tube # 2,
Tube # 3, Tube # 4, Tube # 5 and Tube # 6, and hand tighten the nut on the bolt.
Make sure the tubing is always in a counterclockwise direction.