Medion LIFE P20 SF Manual De Instrucciones página 127

 Press the
button (26) on the remote control to switch the fan on.
The display switches on and shows the last speed level and operating mode used.
 Press the
button (26) on the remote control again to switch the fan off.
The display switches off.
.. Setting the fan speed
 Press the + (28) or  (30) button on the remote control to set the fan speed.
You have a choice of 26 speed levels, which can be selected continuously.
Set the speed levels on the appliance by turning the selector dial (19).
.. Set the operating mode of the fan
 Press the
button (27) on the remote control to select an operating mode.
NORMAL
NATURE
(Natural)
SLEEP
(Sleep mode)
COMFORT
(Comfort)
SILENT
(Quiet mode)
The fan has a memory function that remembers the last settings after
being switched off and starts with these settings again when the fan is
switched on.
The timer is cancelled when the appliance is switched off.
128
The fan runs at the same speed.
The selected speed level and the
display.
The fan runs at different speeds for intervals. The selected start
speed level and the
The fan starts at speed level 8 and switches to level 4 after 30
minutes. After a further 60 minutes, the level is reduced to 2 and
the fan then continues to run at this level.
The selected start speed level and the
the display.
The fan speed cannot be adjusted as the fan operates according
to a fixed pattern.
If the room temperature falls below 20°C, the fan switches off
automatically and the display flashes .
If the room temperature rises above 20°C, the fan switches on
automatically and  disappears from the display.
The selected speed level and the
display.
The fan runs at the same speed with a reduced volume.
The selected speed level and the
display.
symbol light up on the
symbol light up on the display.
symbol light up on the
symbol light up on the
symbol light up on