Publicidad
English
1. Preparation before Set Up
IMPORTANT：
Please answer question prior to set up
What would you like to do?
Watch TV with your Bluetooth headphones/speaker but your TV does not have Bluetooth
–Use the TC417 as a Bluetooth Transmitter (TX) – refer to Point 3
Stream music from your cellphone/PC to non-Bluetooth speakers
– Use the TC417 as a Bluetooth Receiver (RX) – refer to Point 4
2. Basic Operation & LED Indication
Status
Power on
Pairing
Connected
Reconnection
Volume up/down
Low battery
3. Bluetooth Transmitter (TX Mode)
3.1 Pair and connect to Bluetooth headphone/receiver
1) Turn on the TC417:
light.
2) Set the TC417 to TX mode:
3) Enter the TC417 into PAIRING MODE:
autom
the PAIR button for 2 seconds to enter pairing mode.
4) Enter headphones into PAIRING MODE:
when in pairing mode).
5) Connecting:
Once connected, LED indicator stays SOLID
Reconnect
NO need to re-pair the transmitter and headphones for each use. The transmitter will
ALWAYS auto reconnect to the last paired device within 5-10 seconds after powering
on both devices. Alternatively, restart both the transmitter and headphones and wait
5 -10 seconds for them to reconnect.
3.2 Check your TV/Audio Source output options
Jack
Options
Natively
Supported?
Please refer
to Point:
3.3 Connect the TC417 to your TV/audio source
3.3.1 Optical audio out
AUX
SPDIF IN
SPDIF OUT
After connecting your optical cable you should be able to hear sound from your head-
phones; if not:
1) Ensure the AUX/SPDIF(Optical) switch on the TC417 is set to the "SPDIF" position.
2) Ensure your TV Speaker setting is set to "External Speaker".
IMPORTANT:
3)
Speakers
Internal speakers
External speakers
Headset
Fig 3-3 Set TV speaker to "External Speaker"
3.3.2 AUX 3.5mm audio out
AUX
SPDIF IN
SPDIF OUT
After connecting your audio cable you should be able to hear sound from your head-
phones; if not:
1) Ensure the AUX/SPDIF (Optical) switch on the TC417 is set to the "AUX" position.
2) Ensure your TV speaker setting is set to "Headset".
3) Plug wired ear buds into the headphone jack on TV; check if you can hear sound.
Operation
Press and hold MFB for 3 seconds
After power on, press and hold
PAIR
for 2 seconds
/
/
Press and hold MFB for 3 seconds
Tap +/-
/
Press and hold MFB button for 3 seconds until you see the
Slide TX/RX switch to "TX" position.
During the pairing process, keep the devices close to each other and wait.
Optical
AUX/3.5mm
OUT
3.3.1
SPDIF IN
DC SV
Optical audio cable
Fig 3-2 Set up TC417 using TV optical audio out
AUX
DC SV
AUX/3.5 mm audio cable
Fig 3-5 Set up TC417 using TV AUX 3.5mm audio out
Speakers
Internal speakers
External speakers
Headset
LED indication
LED turn SOLID
LED turn SOLID
/
GREEN
Please refer to your headphone's user manual
GREEN
.
RCA jacks
labeled
"AUDIO OUT"
R
L
3.3.2
3.3.3
Fig 3-1 Output options
Settings
Audio Format
Fig 3-4 Set TV Audio Format to "PCM" (IMPORTANT)
Fig 3-6 Set TV speaker to "Headset"
- 1 -
GREEN
slowly(TX Mode)
BLUE
GREEN
BLUE
GREEN
(TX Mode)
BLUE
(RX Mode)
GREEN
RED
Other RCA
Big Phone
jacks (usually
Jack
audio IN)
N/A
3.3.4
OPTICAL
PCM
Dolby Digital
DTS
DTS Neo 2:5
GREEN
Publicidad
