Refco REFSCALE-S Manual De Instrucciones página 28

With the REFSCALE-S it is possible to establish a connection to the
REFCO REFMESH App or to the REFMATE digital manifold. To
connect to REFMESH or REFMATE, the Wireless connection symbol
must be flashing, which indicates that the scale is searching for a
connection. As soon as a connection is established, the Wireless
connection symbol lights up continuously.
Connection to REFMESH
With the REFMESH you can easily establish a connection with the
REFSCALE-S via the usual "connect" window on the REFMESH. Via
REFMESH it is possible to set tare, use the hold function, set an
alarm and save a value which can be shown in a report.
Connection to REFMATE
When the connection LED flashes you can easily search for a device
with the REFMATE. If the REFSCALE-S is within the range, you can
connect the device via "Wireless Devices". When the devices are
connected, you can see the REFSCALE-S values on the REFMATE.
On the REFMATE you have access to the additional screen by
pressing the SWITCH button.
Recommendation
A connection of the REFMESH and the REFMATE to the REFSCALE-
S at the same time is not possible. You can connect the REFMATE
to the REFSCALE-S and the REFMESH to the REFMATE. The current
measured value is displayed in all devices.
Instruction Manual 27