Publicidad
Idiomas disponibles
Idiomas disponibles
Extractores de grasa
Range hoods
E-IV.B. Essen
Drill a hole in the cupboard, with hole wide 715*265(mm) for 75cm.
Refer to picture below. Make sure the distance between the edge of the
hole and the edge of the cupboard edge is at least 35mm.
Remove the aluminum filter and remove
the two front panel screws.
Use a screwdriver to secure the 8pcs
ST4*18 screws to the cabinet.
Replace the front panel with the two screws
and replace the filter.
Install the v-flaps to the outlet and fix the
expansion pipe to the outlet with a cable
tie.
Note: The expansion pipe is not included in
this model.
www.derkochline.com
25
Publicidad
