Accessmatic Mastodon 224 Manual De Usuario página 30

7. Transmitter ( Remote control ) setting
7.1 Transmitter's code setting
Press "LEARN BUTTON", the "LEARN LED" light on, then, press and hold the button which you choose on the transmitter till the
"LEARN LED" ashes and goes out, now, the transmitter is code. Other transmitter can be coded as this way.
7.2 Erasing the transmitter's code
Press "LEARN BUTTON" and hold on to make the "LEARN LED" light on and till go out. Now, all codes of transmitters which had
been learnt are cleared.
7.3. Error codes
Code Meaning
E2 Motor nonstop running over limits
E3 Motor locked rotor
E5 Abnormal hull
E7 Photocell is triggered
E8 Air wave sensor triggered
Opening your life
Solution
Check the hull wires
Remove the object that blocks the photo beam
Remove the object that blocks the air wave
9
Code: MTD224