Silvercrest SSMA 67 B2 Instrucciones De Uso página 60

Fig. 1
4) To distribute the ingredients better, you can move the appliance while it
chops the food. To do this, hold the appliance in your hand and make
sweeping back and forth movements with it (see Fig. 1). Make sure that the
blender jug 4 does not come off the motor unit 9.
Note: If the cross blade 5 is blocked, the indicator light 8 lights up alternate-
ly 5 times red and 5 times white. Carefully loosen the stuck parts, e.g. using a
fork, and restart the appliance. The indicator light 8 lights up white again.
5) Carefully loosen stuck parts using a fork, for example, and then start a new
cycle. After 50 seconds, one cycle is completed and the appliance switches
off automatically. Wait 3–5 minutes before starting the next cycle to allow
the motor to cool down.
6) If you want to stop the chopping process before the appliance is finished,
press the On/Off button 7 once. The appliance stops working immediately.
7) Once the chopping process is finished, hold the appliance so that the
opening of the blender jug 4 faces upwards and the cross blade 5 on
the motor unit 9 faces downwards. Unscrew the motor unit 9 by turning it
anticlockwise.
8) You can also use the blender jug 4 as a drinking cup. For transport or
storage in the refrigerator, use the supplied lid 1.
Note: Consume the drink as soon as possible after preparation. Do
not store the freshly prepared smoothie for longer than 6 hours, as small
chopped ingredients can spoil quickly.
9) Clean the appliance immediately after use as described in the section
Cleaning.
SSMA 67 B2
GB │ IE │ NI │ 57 ■