Publicidad
Idiomas disponibles
Idiomas disponibles
9.6
Fuel filter
9.7
Way of the cooling air
9.8
Spark Plug
Starting problems and misfiring are often caused by a fouled sparking plug. Periodically clean
the sparking plug, and replace with a new one as and when required.
Important: When dismounting the plug cap, be careful not to remove the seal.
Operating the engine without the seal may cause the engine to overheat.
Important: When inserting the sparking plug, first screw it in with your fingers,
and then tighten it with the help of a suitable plug spanner. Overtightening will
damage the cylinder and the piston.
Copyright © 2019 VARO
POWPG30110
When the engine runs short of fuel supply,
check the fuel cap and the fuel filter for
blockage.
This engine is air-cooled. Dust clogging between
the inlet port of the cooling air and cylinder fins
will cause overheating of the engine.
Periodically check and clean the cylinder fins
after removing the air cleaner and the cylinder
cover.
P a g e
| 12
EN
www.varo.com
Publicidad
