Vacmaster SCA0801 Manual Del Usuario página 10

GB
WARNING: The motor noise changes to a higher pitch when the dirty water tank is full
or blocked. Stop the vacuum immediately and empty the dirty water tank.
WARNING: Remove the power cord from the power supply before carrying out any
maintenance.
1. Cleaning Exterior
1) Turn off and unplug carpet cleaner.
2) To clean exterior, or to reduce static electricity and dust build-up, wipe outer surface with a
clean, damp and soft cloth. Wipe dry after cleaning.
2. Cleaning Nozzle and Attachments
It is recommended to clean attachments with water after each use.
1) Press the tool release button to remove the attachment from the hose (Fig. 15).
2) Press the cover release button ( ④ ) on the nozzle to remove the cover (Fig. 16).
3) Rinse thoroughly with clean water. Allow the parts to dry before reinstalling.
4) Reinstall the nozzle cover and the insert back into place until a click is heard.
3. Hose Cleaning Tool
1) Remove the clean water tank and fill with warm water (Max 40°C).
2) Attach the hose cleaning tool to the suction hose (Fig. 17). Ensure any tools or attachments are
removed.
3) Make sure both the clean water and dirty water tanks are secured on the unit.
4) Press the power button to turn the carpet cleaner on and hold the spray trigger for 30 seconds
(Fig. 18). The clean water will rush through the suction hose, effectively cleaning and removing
any trapped dirt and debris in the hose which may build up over time. Repeat as needed. Let
the machine run for 5-10 seconds before turning off.
5) Turn off and unplug carpet cleaner.
4. Cleaning the Filter Grill
1) Remove the dirty water tank from the side of the unit.
2) Remove any dirt and debris from the filter grill ( ⑤ ) as shown (Fig. 19).
MAINTENANCE
10