Sangcon KDL-546-2B Manual Del Usuario página 6

·To Adjust to a Coarse Grind: Rotate the adjuster from
"FINE" to "COARSE". If the adjuster becomes loosen, it may
be due to pepper grains stuck in the burr. Simply rotate the
grinder for 1 second to loosen the burr and then continue
adjusting. This is a normal occurrence with ceramic burrs
and will not affect its normal use.
·If the adjuster falls off, please assemble the components in
the orders shown below.
TROUBLESHOOTING
If the grinder does not work or stops while grinding:
·Please check that the batteries are alkaline batteries.
·Please check that the batteries are installed correctly.
.Please confirm that there is sufficient battery power.
.Please adjust the adjuster in a counter-clockwise direction.
If the above steps are all correct and the grinder still does
not work properly, please contact the vendor for
maintenance service.
NINGBO KAIDELI ELECTRIC CO., LTD.
Address: Binhai Industrial Zone, Xidian Town, Ninghai,
Zhejiang, 345613 China
Post-sale service: Service@Forlim.net