Publicidad
Idiomas disponibles
Idiomas disponibles
9
1.
Power Button (Hold ON / Press OFF)
2.
Timer Button
3.
Handle and Lid
4.
60-Minute Timer LED Indicator
5.
45-Minute Timer LED Indicator
6.
30-Minute Timer LED Indicator
USING THE TOWEL WARMER
The Towel Warmer will warm one bath towel measuring approximately 40" x 70". For best results, use 100%
cotton towels only.
1.
Place the Towel Warmer on a dry, level, hard surface.
2.
Insert power cord into an electrical outlet.
3.
Place your dry towel(s) inside. Replace the lid.
4.
Press and hold the POWER BUTTON until the TIMER LED INDICATOR turns on. The TIMER LED INDICATOR
turns blue, indicating the Towel Warmer is preheating (default timer setting is 15 minutes).
5.
When the Tower Warmer has reached the optimal heating temperature, the TIMER LED INDICATOR turns
red. The Towel Warmer will continue to maintain the optimal heating temperature for the remainder of
the timer setting (timer starts to countdown when TIMER LED INDICATOR turns red).
6.
To ensure the towel is fully heated, you may want to leave the towel in the Towel Warmer for a few
minutes after the TIMER turns off.
The Towel Warmer will automatically turn off after the selected timer setting has expired. Press the
7.
POWER BUTTON to turn the Towel Warmer off if you would like to power off the unit sooner.
"Hot Surface" LED indicator will stay on until the towel warmer cools down when it's safe to touch the
8.
metal interior.
SELECTING THE TIMER
1.
When the Towel Warmer is powered on, it will automatically default to 15 minutes.
2.
Press the TIMER BUTTON to select either 30-minute, 45-minute, or 60-min timer.
FREQUENTLY ASKED QUESTIONS
Why won't my Towel Warmer turn on?
Make sure the Towel Warmer is properly plugged into a wall outlet then press and hold the POWER BUTTON to
turn on the unit.
Why is my Towel Warmer taking a long time to reach optimal heating temperature?
Be sure to only use dry towels; using damp towels will greatly extend the preheating cycle.
CARE AND MAINTENANCE
• Remove the power cord from the electrical outlet before cleaning. Wipe with a dry cloth.
• Do not use chemical agents as they may discolor the inner tub.
LOCATION OF PARTS AND CONTROLS
8
7
6
5
4
3
2
1
10
11
7.
15-Minute Timer LED Indicator
8.
Hot Surface Caution LED Indicator
9.
Cord Warp
10.
Lid
11.
Handle
Publicidad
