Installing The Carrier Imatrix On Iplatform; Detaching The Imatrix Baby Carrier From The Iplatform - JANE iMATRIX Manual De Instrucciones

iPLATFORM
H. INSTALLING THE CARRIER iMATRIX ON
iPLATFORM
Position the baby carrier so that it is fastened with the Pro-Fix anchors
intended for the iMATRIX(7). 2 .a
Check that it is fastened on both sides, the green signal should be
2
displayed. .b
Set the iMATRIX handle to the CAR position, make sure that it is loc-
ked in place, and that the whole car symbol is displayed.
this, simultaneously press the release buttons found on both sides
of the handle, and set it to the position that is furthest forward.
Turn the handle (5) so the whole group is firmly pressed against the
vehicle backrest. 2 .e
! WARNING: Your iPLATFORM can be used with two different
baby carrier models, make sure you insert the Pro-fix of your
iMATRIX into the correct position for this model, you will find
the instructions on the platform. Once anchored, the exterior
surface of the safety seat backrest should be touching the
2
fastening bar (9). .f
I. DETACHING THE iMATRIX BABY CARRIER FROM
THE iPLATFORM
Place the iMATRIX handle in the Carry position.
Pull the release levers on both sides of the handle to release the Pro-
fix anchors and lift the baby carrier up.
2 .c To do
2 .d
iPLATFORM
3
49
EN