Black and Decker BHTC3AR Manual De Instrucciones página 8

SET UP & USE
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug the unit directly into a 120V AC
electrical outlet.
NOTE: Only operate heater in upright position.
1. FOR FAN Operation: Press the ON/OFF
on. To turn off the fan or heater, press the
enter standby mode.
2. FOR HEAT MODE: When the fan is ON, press the HEAT
setting. One press for Low Heat (900W) or twice for High Heat (1500W). Press the
button again to turn off HEAT and return to FAN only function.
3. SLEEP TIMER Operation: Automatically shuts the unit OFF after the desired
amount of time has passed. Press the SLEEP TIMER
function. NOTE: The timer can be set up to 24 hours. "00" on display turns off the
Timer. Press the UP
TIMER button again to set timer.
4. OSCILLATION: Press the OSCILLATION
Press button again to turn off feature.
5. THERMOSTAT Operation: A thermostat / constant temperature feature is included
to maintain the desired temperature setting when in use.
Press and hold the HEAT
feature. Thermostat can be set between 59°-95°F. Press the UP
keys to desired temperature. Then press HEAT
NOTE: The heater will automatically run on LOW or HIGH heat depending on the
ambient temperature and the set temperature. When the ambient temperature
and set temperature is greater than 2°, it will operate on a HIGH heat setting.
When the ambient temperature and set temperature is less than 4°, it will operate
on a LOW heat setting. When the difference between the ambient temperature
and the set temperature is greater than 4°, the FAN ONLY setting will operate.
When Thermostat function is ON, press the HEAT
and enter normal mode.
Page 8
POWER HEAT SLEEP TIMER
TEMPERATURE/TIME
INCREASE
and DOWN
button for 3 seconds to initiate the Thermostat
DIGITAL DISPLAY
button, the fan will automatically turn
button again with a single click to
buttons to set desired time. Press SLEEP
button to enter the oscillation function.
again to set.
button to turn off Thermostat
OSCILLATION
"TEMPERATURE/TIME
DECREASE
button to desired heat
button to initiate Timer
& DOWN