Airzone Aidoo Pro Fancoil Guia De Inicio Rapido página 5

Aidoo Pro Wi-Fi Fancoil
Controller by Airzone
FUNCTIONS
Aidoo Pro Fancoil is a solution for the remote management and integration of fancoil units
via Cloud services. Thanks to its wide range of integration options, Aidoo Pro facilitates the
management of these units from home automation and building management systems, or
even from a smart thermostat, without losing functionality.
Aidoo Pro Fancoil is connected to the HVAC unit by cable. The control and configuration of this
device is carried out via Bluetooth and Wi-Fi from the "Airzone Cloud" app (available for iOS and
Android). Wireless network connection is via Wi-Fi Dual (2.4/5 GHz).
Note: For more information about our products, visit airzonecontrol.com.
The main functions of the Aidoo Pro Fancoil device are:
Unit control and error detection. The following unit parameters can be configured:
•
Unit status control (On/Off).
•
The operation mode in which the system is working.
•
Fan speed.
•
Set-point temperature.
•
Room temperature reading.
Basic mode. This allows you to limit the thermostat's available functions. This mode allows
control of the following parameters: On/Off, set-point temperature and fan speed.
Autochange. Allows you to configure changing from automatic mode based on the
configured limit values for the battery temperature.
•
Battery temperature
the system.
•
Battery temperature
the system.
Time schedules. Status, temperature, mode and speed scheduling.
Anti-freezing. This function is pre-configured from the Zone Settings menu of the Airzone
Cloud application and is activated when the ambient temperature drops below 10ºC. In this
case, the heat valve opens, and ventilation starts to prevent further temperature drop.
Integration ports. The device features RS-485 standard integration through Modbus RTU/TCP,
BACnet MS/TP and BACnet IP, Airzone thermostat, Lutron Palladiom thermostat, AirQ Box and
AirQ Sensor.
≥ Minimum battery temperature
Maximum battery temperature
≤
→ Heating mode will be imposed on
Cooling mode will be imposed on
→
EN
5