Kärcher IVR 40/15 Sc Manual Del Usuario página 15

Behaviour in the event of an
emergency
DANGER
Risk of injury and material damage
when vacuuming inflammable materi-
als, or in the case of a short-circuit or
other electrical faults
Danger of inhalation of gases hazardous to
health, danger of electric shock, danger of
burns.
In the event of an emergency, switch off the
device and unplug the mains plug.
Electrical connection
The device may only be connected to an
electrical connection which has been set up
by a qualified electrician as per IEC 60364.
For the connection values see Technical
data and type plate. Use of an extension
cable is prohibited.
DANGER
Danger of electric shock
Danger of death
Avoid damaging the power cables by driv-
ing over them or otherwise crushing them,
or by jerking them.
Protect the cables from heat, oil and sharp
edges.
Check the mains connection of the device
for damage every time before operation.
Do not operate the device using a damaged
cable. Have any damaged cables replaced
by a qualified electrician.
Symbols on the device
Industrial vacuum for flammable dust,
until list/set-up outside zone 22
Observe the warning sign on the
device!
The device is not suitable for:
● Intake of liquids with high risk of explo-
sion and for mixtures of flammable dusts
and liquids.
● Connection to dust-producing ma-
chines.
● Absorption of glowing dust or other igni-
tion sources.
The device is not suitable for:
● Operation in potentially explosive at-
mospheres.
Device description
For the figures, please refer to the graphics
pages
Illustration A
Collection container
1
PE dust bag
2
PE dust bag fastener
3
Push handle
4
Suction hose connection
5
Pocket filter
6
Power cable
7
Power switch
8
Gauge
9
Equipotential bonding cable
10
Suction head lock
11
Equipotential bonding cable
12
Pressure equalization tube
13
Accessory holder
14
Initial startup
See graphics pages for illustration
1. Bring the device into the working posi-
tion.
2. If necessary, secure the device using the
parking brake.
3. Ensure that the suction head is fitted
correctly.
4. Insert the suction hose into the suction
hose connection.
Note
The hose diameter DN50 is only permitted
for devices with power variants 3.0 kW and
4.0 kW, and 1.5 kW hose diameter DN40.
Illustration B
5. Plug the desired accessory onto the suc-
tion hose.
For the figures, please refer to the graphics
pages
1. Plug the mains plug into the socket.
2. Switch on the device at the trigger.
Illustration C
3. Start vacuuming.
English
Operation
15