Publicidad
Idiomas disponibles
Idiomas disponibles
GB
User manual
Dear customer, thank you for purchasing this wireless
charging station. The 5 in 1 wireless charging station with
GaN technology is powered by a single power source
and can charge up to 5 devices simultaneously.
Place your Qi-enabled smartphone, your Apple-
compatible smartwatch and your wireless headphones
on the corresponding charging point and they will be
charged automatically. Use the USB Type-C and USB-A
output to supply devices such as tablets or laptops with
power via cable.
Please read this user manual and follow the safety inst-
ructions and tips. Keep these instructions in a safe place
so that you can access them at any time.
Scope of delivery:
• Qumag65 charging station
• Euro power cable
• 2 metal rings
• User manual
Overview:
1. Smartwatch charging area
2. Smartphone charging area
3. Headset charging area
4. USB-A connection
5. USB Type-C
connection
®
6. Mains connection
7
2
1
3
6
4
5
Unfolding the charger
Unfold the charging station by lifting the smartphone
charging surface (2) upwards. The charging station
straightens up.
NOTE: The smartphone charging surface as well as
the USB Type-C and USB-A output can also be used
when folded up.
Supplying the charging station with power
Connect the supplied Euro mains cable to an earthed
socket and the mains connection of the charging
station (6).
Charge your smartphone wirelessly
Place your MagSafe compatible smartphone with the
back on the charging station in the center of the wireless
charging area (2). As soon as the smartphone is placed
correctly, the charging process begins. If the smartphone
does not charge, readjust the smartphone on the char-
ging surface. Remove any objects that are between the
charging surface and the smartphone. Make sure that the
smartphone supports inductive charging.
NOTE: To charge non-MagSafe-compatible smart-
phones, use the metal ring included in the scope of
delivery to stick to smartphones or their protective
cases. Please note that thicker protective covers may
impair wireless charging. When attaching the metal
plate, make sure that it is not stuck to the position
of the induction coil in the smartphone. Charging via
induction is then not possible!
GB
8
Publicidad
