Brandson Equipment 306572 Manual Del Usuario página 36

Log in to the app or register if necessary.
You can now add a new device in the main menu using the „+" symbol.
Disconnect the air purifier from the mains. Then connect it to a power socket and
switch the air purifier on. To enter WIFI mode, press the "SPEED" button for 3 sec-
onds until the WIFI symbol flashes. Make sure that the "ON/OFF" button on the
appliance lights up white. The symbol flashes for 2 minutes. If the WIFI is success-
fully connected, the symbol lights up. If the WiFi connection is not successfully
established within 2 minutes, the air purifier will exit WIFI mode.
Note: The air purifier, the mobile phone and the router must be in the same
network. Only the 2.4 GHz WiFi network is supported here.
The air purifier then appears in your app.
36
English
-