Replacing the filter
For the figures, please refer to the graphics
pages
Illustration J
1. Unscrew the hexagon screw.
2. Unscrew the screw plug.
3. Remove and replace the filter.
4. Insert the new filter.
Ensure that the filter is inserted correctly
during installation.
5. Screw in and tighten the screw plug.
6. Screw in and tighten the hexagon screw.
Replacing the pocket filter
See graphics page for illustrations
Illustration K
Screws
1
Clamping ring
2
Pocket filter
3
Cleaning fixture
4
1. Remove the suction head (see chapter
Removing the suction head).
2. Remove the filter unit from the device
using the handles and turn it over.
Illustration L
3. Remove the screws and remove the
cleaning fixture.
4. Loosen the clamping ring screw connec-
tion.
5. Remove the pocket filter.
6. Dispose of the foam filter.
7. Insert the new bag filter.
8. Insert the new foam filter.
9. Fit the tensioning ring and screw it in
place.
10.Fit the cleaning device and screw it on.
11.Insert the filter inlay.
In doing so, make sure the tab on the fil-
ter inlay fits into the shaft.
Illustration M
Troubleshooting guide
DANGER
Risk of injury
Danger of the device unintentionally start-
ing and danger of electric shock
Switch off the device and unplug the mains
plug before performing any work on the de-
vice.
Have all checks and work on electrical
parts performed by an qualified technician.
The motor (suction turbine) does not
start up
No electrical voltage present
Check the socket and the power supply
fuse.
Check the mains cable and the mains
plug of the device.
The suction power decreases
Nozzle, suction hose or suction pipe
clogged.
Check the nozzle, the suction hose and
the suction pipe and clean if necessary.
The filter is dirty.
Clean the filter.
Customer Service department
If the malfunction cannot be corrected, the
device must be checked by the Customer
Service department.
The warranty conditions issued by our rele-
vant sales company apply in all countries.
We shall remedy possible malfunctions on
your appliance within the warranty period
free of cost, provided that a material or
manufacturing flaw is the cause. In a war-
ranty case, please contact your dealer (with
the purchase receipt) or the next author-
ised customer service site.
(See overleaf for the address)
Further warranty information (if available)
can be found in the service area of your lo-
cal Kärcher website under "Downloads".
English
Warranty
17