Publicidad
Idiomas disponibles
Idiomas disponibles
b. Do not submerge the pumping unit under water or wash it with running
water.
c. When you are not using the pumping unit, store it in a cool, dry place.
06. ASSEMBLING THE BREAST PUMP
1. Wash your hands thoroughly with soap and water before touching your
breast and the breast pump.
2. Connect the breast shield, suction cap and suction bowl to be connector.
3. Place the valve in the connector and screw the milk bottle onto the connec-
tor, turning it clockwise until it stops.
4. Connect the tube to the suction cap (1) . If you want to express milk from
both breasts simultaneously, connect the tubing to both suction caps (2)
SEE FIG. 5.
Tips:
a. Check the breast pump components for damage before each use. Repla-
ce damaged items with new ones as needed.
b. Always check the cleanliness of the elements before using the machine
c. To avoid damage to the breast pump, make sure that all its parts are dry
before using it.
07. CHARGING THE BREAST PUMP
Before the first use, charge the breast pump for 2 hours by connecting it to the
power supply using the USB cable. The battery icon on the display will be full when
charging is complete.
SEE FIG. 7
Full blinking battery – low battery, connect device to power.
SEE FIG. 8
Blinking battery, not full – battery being charged, current battery charging status.
SEE FIG. 9
Full battery – battery fully charged.
The breast pump can be used when the device is connected for charging. Your
device's battery will charge when you plug it into power. The battery of the device
will not be charged when the pumping device is switched on.
Fully charge the battery before putting it into storage if you intend to not use the
breast pump for a long period of time.
Charge the device's battery before it is completely depleted. This extends battery
life.
If the breast pump has been stored in a hot place, the battery of the device may not
work at first. Allow the breast pump to cool down for an hour before using it.
16
Publicidad
