Publicidad
Idiomas disponibles
Idiomas disponibles
English
Troubleshooting
Error codes
The robot will remind you by flashing a red light and sounding prompt when
it malfunctions.
NO.
Voice content
The ground sensor
01
is blocked.
The robot gets stuck,
02
please move the robot.
Note:
If the solutions above don't resolve the issue, please try the following:
1. First, press and hold the AUTO button for 5 seconds to turn off
the robot , then press and hold the AUTO button for 3 seconds to
turn on the robot.
2. If restarting the robot still does not solve the problem, please send
the machine to the after-sales center for repair.
For more details, please visit www.iliferobot.com
Trouble cause
The ground sensor
is faulty.
The robot cleans
small areas for a
long time.
What to do
Check the
ground sensor.
Move the robot.
25
Publicidad
