STEINEL XLED home 2 S Manual Del Usuario página 21

Time setting (Fig. 6.1 / E)
The time you want the LED floodlight to stay on
for (main light) is infinitely adjustable from approx.
8 seconds to a maximum of 35 minutes. Any
movement detected before this time elapses will
restart the timer.
– Control dial set to + = longest time,
– Control dial set to – = approx. 8 seconds
Twilight setting (Fig. 6.1 / F)
The LED floodlight's chosen response threshold
can be infinitely varied from approx. 2 to 1,000 lux.
– Control dial set to
(independent of ambient brightness)
– Control dial set to
(approx. 2 lux)
The control dial must be turned to
adjusting the detection zone and performing the
functional test in daylight.
Note:
When setting the detection zone, we recommend
selecting the shortest time.
Note:
After the LED floodlight switches OFF, it takes
approx. 1 second before it is able to start detecting
movement again. The LED floodlight will only
switch ON in response to movement once this
period has elapsed.
Reach setting / adjustment
The detection zone can be optimised to suit
requirements.
– Sensor unit swivels through 180°. (Fig. 6.3)
– Sensor unit tilts through 90°. (Fig. 6.6)
Adhesive shroud (Fig. 6.4)
The film shroud can be used for masking out any
number of lens segments to limit reach as required.
Inadvertent triggering is ruled out or the sensor can
be targeted to watch over danger spots (Fig. 6.5).
Other information:
Floodlight adjustment range (Fig. 6.2)
approx. 35 minutes
= daylight operation
= night-time operation
when
Note:
The settings last selected on the control will be
used.
STEINEL Connect App (XLED home 2 SC)
To configure the device via smartphone or tablet,
you must download the STEINEL Connect App
from your app store. You will need a Bluetooth-ca-
pable smartphone or tablet.
XLED home 2 SC
Factory settings
Twilight setting: 2,000 lux, daytime mode, lux teach
Time setting: 5 seconds
Android
iOS
Functions:
Following functions can be set via the STEINEL
Connect App:
– Time setting 5 s – 60 min.
– Twilight setting 2 – 2,000 lux
– Teaching lux
– Basic light level
– Main light level
– Soft light start function
– Teaching time of day
– Reach adjustment
– Bluetooth interconnection
Time setting
The stay-ON time can be set to any period from
approx. 5 seconds to a maximum of 60 minutes.
Every movement detected re-activates the light.
The shortest time setting is recommended when
adjusting the detection zone and performing the
functional test.
– 21 –
GB