Publicidad
Idiomas disponibles
Idiomas disponibles
Bumper bar
Calf support
Footmuff
(if specified)
Raincover
Care & Maintenance:
•
Your travel system has been designed to meet comprehensive safety standards, and with correct use and
maintenance will give many years of trouble free performance.
•
Storage - Always store your travel system dry. Storing a damp travel system will encourage mildew to form,
so always wipe away any moisture with a soft cloth and allow to dry thoroughly before storing. Never leave
in sunlight for prolonged periods - some fabrics may fade.
•
Cleaning - Refer to wash care labels on soft goods for cleaning instructions. Plastic and metal parts may be
sponged clean with warm water and a mild detergent. Never clean with abrasive, ammonia based, bleach
based or spirit type cleaner.
•
Wear & Tear - Continual impact can cause damage. The chassis is strong but will weaken should the back
wheels be bumped down stairs or kerbs. Tyres will wear with use and wheel units should be replaced if
necessary. If your child wears hard shoes these might damage the soft fabric.
•
Maintenance - Regularly inspect the locking devices, brakes, wheels, harness assembly, catches, seat
adjusters, joints and fixtures to ensure they are secure and in full working order. They should move freely
at all times and minimum maintenance should be required. However a regular light application of a spray
lubricant e.g. silicone (do not use oil or grease) will extend the life of your travel system and make opening
and folding easier. Your travel system should be serviced and reconditioned before using it for a second
baby, or after 18 months, whichever is the sooner.
You should only be able to insert 2 fingers between the shoulder strap and waist
strap.
NOTE: Winter/ Summer clothing can make a difference to the size of your child.
55-
Refitting the chest pad:
56-
Fitting:
57-
Removing:
58-
Removing the bumper bar fabric cover (if specified):
59-
Adjusting:
60-
Fitting:
Open the harness (See Step 49) and remove the crotch pad.
Push the harness straps through the footmuff (a).
Refit the crotch pad (b) and fit the headhugger (c) then close the harness (See
Step 50) .
61-
Using the hood section:
62-
Using the flap section:
63-
Fitting:
Removing is a reversal of this procedure.
64-
Accessing the recline lever and essential cross body bag:
65-
Using access zip:
6
Publicidad
