cecotec MOUNTAIN MILLOR Manual De Instrucciones página 7

- Always wear a suitable bicycle helmet and ensure that it
is correctly fitted. The use of helmets is of vital importance
to safeguard the integrity of the head in case of falls or
accidents.
- Periodically check the brakes to ensure that they are
functioning properly. Check brake pads for wear and tear,
and adjust if necessary. Brakes in good condition are
indispensable to ensure efficient braking ability.
- Check tyre pressure regularly. Ensure that the tyres are
inflated to the recommended pressure. Underinflated tyres
can affect the stability and performance of the bike, as well
as increase the risk of punctures.
- Inspect the steering of the bicycle and ensure that it is
properly adjusted. Check that there is no play and make
sure that it rotates smoothly without hindrance. Loose or
defective steering can compromise control of the bicycle.
- Regularly check tyres for damage or deformation. Ensure
that they are in good condition, with no cracks, dents or other
problems that could compromise their structural integrity.
- Use caution with braking distances in wet conditions.
Remember that brakes may be less effective on wet
surfaces, so increase braking distance and reduce speed in
wet or slippery conditions.
- It is vital to use original spare parts for safety critical
components. These parts are specifically designed for your
electric bike; they meet the appropriate standards and
guarantee optimum performance and safety. The use of
non-original parts may compromise the safety and function
of the bicycle. Prioritise your safety and use only original
spare parts supplied by the manufacturer or authorised
dealer.
- It is important to watch out for wheel rims and to be aware of
12
MOUNTAIN MILLOR
any dangerous wear. The wheel rims may suffer from wear
due to various factors, such as knocks, friction or prolonged
use. It is essential to regularly inspect wheel rims for signs
of excessive wear, cracks or damage. If any problems are
observed, they should be addressed immediately to avoid
potential risks while driving.
- WARNING: as with all mechanical components, the E-bike
is subject to wear and tear and high stresses. Different
materials and components can react to wear or fatigue in
different ways. If the service life of a component has been
exceeded, it could suddenly fail, possibly causing injury to
the rider. Any form of cracking, scratching or discolouration
change in highly stressed areas indicates that the
component's lifespan has been reached and it should be
replaced.
- WARNING: in composite components, impact damage may
be invisible to the user. The manufacturer must explain the
consequences of impact damage and that, in the event of an
impact, the composite components must be returned to the
manufacturer for inspection or destroyed and replaced.
- It is important to note that composite components can
be affected by high temperatures, especially in confined
environments. It is recommended to avoid exposing the
electric bicycle to intense heat sources such as radiators,
vehicle exhausts or storage in enclosed spaces without
adequate ventilation. Excessive heat can cause deformation,
weakening of materials or even structural failure.
- When installing a child seat on the electric bike, it is essential
to ensure that any springs under the saddle are adequately
covered. This is to avoid the risk of the child's fingers or any
objects getting caught in the spring, which can cause injury.
- It is important to note that bicycle handlebars can have
13
MOUNTAIN MILLOR