Klipsch ProMedia GMX A-2.1 Manual Del Propietário página 2

IMPORTANT SAFETY INSTRUCTIONS!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION! To reduce the risk of electric shock and fire, do not remove the cover
or back plate of the device enclosure. There are no user serviceable parts inside.
Refer servicing to a Klipsch authorized service center.
CAUTIONI The international symbol of a lightning bolt inside a triangle is intended
to alert the user to uninsulated "dangerous voltage" within the device enclosure.
The international symbol of an exclamation point inside a triangle is intended to
alert the user to the presence of important operating, maintenance and servicing
information in the manual accompanving the device.
WARNING! To reduce the risk of fire or electrical shock, do not expose this equip-
ment to rain or moisture.
1. Read Instructions — All safety and operating instructions should be read
before operating the device.
2. Retain Instructions — The safety and operating instructions should be
retained for future reference.
3. Heed Warnings — All warnings on the device and in the operating instructions
should be adhered to.
4. Follow Instructions — All operating and safety instructions should be followed.
5. Attachments — Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
6. Water and Moisture — Do not use this product near water (for example, near
a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like).
7. Ventilation — Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect it from over
heating, and these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
8. Heat— Ihis product should be situated awav from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers) that
produce heat.
9. Power Sources — This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type
of power supply in your home, consult with your product dealer or the local
power companv. For products intended to operate from batterv power, or
other sources, refer to the operating instructions.
10. Polarization — This product mav be equipped with a polarized alternating-
current line plug (a plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should stilll fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
1
—
. Power Cord Protection — Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the product.
12. Overloading — Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electrical
shock.
13. Lightning and Periods of Non-Use — For added protection for this product
during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning and
powerline surges.
14. Cleaning — Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
15. Object and Liquid Entry — Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
16. Damage Requiring Service — Unplug this product from the wall outlet and
refer servicing to qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and often will require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance — this
indicates a need for service.
17. Replacement parts — When replacement parts are required, be sure the
service technician has used replacement parts specified b y the
manufacturer or have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
18. Safety Check — Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
19. Servicing — Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.
all servicing to qualified service personnel.
If this unit is purchased outside of the U.S., please contact your local dealer or
distributor for service center information. If purchased inside the U.S. and dealer
service is not available, contact Klipsch Customer Service for a return authoriza-
tion (RA) number before shipping. For further service information, contact:
KLIPSCH CUSTOMER SERVICE
3902 WOODVIEW TRACE, SUITE 200
INDIANAPOLIS, IN 46268-1104
1-888-554-5665
WWW.KLIPSCH.COM
IMPORTANT NOTE: BEFORE YOU BEGIN
N Do not plug in the GMX A-2.1 subwoofer's power cord until all other
wiring is completed, and do not disassemble the system before you have
unplugged the subwoofer's power cord. Be especially careful not to
connect or disconnect any signal cables while power is applied. Failure
to observe this caution may result in loud hums, buzzes, or pops that
will at the very least be annoving and that in the extreme may damage
your speakers.