SOLAC FAST 2200 LEGERE Instrucciones De Uso página 7

SAFETY THERMAL PROTECTOR
• The appliance has a safety device, which protects the
appliance from overheating.
• If the appliance turns itself off and does not switch itself
on again, disconnect it from the mains supply, and wait
for approximately 15 minutes before reconnecting. If the
machine does not start again seek authorised technical
assistance.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
• Never immerse the appliance in water or any other liquid
or place it under running water.
CLEANING THE FILTER
• The air inlet filter should be cleaned periodically for proper
operation of the device.
• To do this, turn the filter counterclockwise. (Fig. 2)
• Clean the filter and remove any dirt or hair.
• Put the filter back in its place and turn clockwise.