DeLOCK 91680 Manual Del Usuario página 3

English
Hardware Installation
1.
Turn off your PC and unplug the power cord.
2. Open the housing.
3. Remove the panel from the available 3.5" bay.
4. Insert the card reader into the bay and screw the card reader to the housing.
5.
Connect the SATA cable with the Card Reader and an available SATA port of
your computer.
6.
Connect the power cable to your power supply.
7. Reattach the housing and connect the power cord to the AC adapter.
Driver Installation
1.
Switch on your computer.
2.
The card reader will be recognized and you can start using the device
immediately.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 05/2024
-3-