How to use Cold Head:
The cold head helps to treat muscle
inflammation. Before using the cold
head, place it in the freezer for about 2
hours for best results.
Connect the cold head to the massa-
ger and turn it on (press and hold the
power (mode) button for 1-2 seconds).
Adjust the massage gun to the desired
speed and at the desired location.
How to charge:
- Before using it for the first time, char-
ge it fully (about 3-4 hours).
- Connect the USB charging cable (in-
cluded) to a suitable USB socket with
DC power.
- The battery capacity indicator will li-
ght up and go up when the battery is
charging.
How to clean:
- Before cleaning, make sure that the
power switch is turned off and the
power plug is disconnected from the
product.
- Use a soft cloth to wipe the surface of
the product and the control panel.
- Use a slightly damp cloth for cleaning
and then wipe it dry.
Safety precautions:
- For adults only
- Use only on the soft tissues of the
body to avoid the pain or discomfort.
Do not use it on head, bones, or other
hard areas
- Keep fingers, hair or other body parts
from the shaft and the back of the mas-
sager head to avoid pinching.
- Do not place anything into the ventila-
tion holes on the shaft.
- Do not immerse this product in water
or allow water to enter the product.
- Do not drop or misuse this product.
- Keep children and pets away from the
movable parts of this product.
- Do not use attachments not recom-
mended.
- Do not use this product outdoors.
- Do not use when the ambient tempe-
rature is above 40ºC and below 5ºC.
- The recommended usage time of this
product is 15 minutes/session.
- Check if any part of this product is da-
maged before use. If so, do not use it.
- Do not fall asleep while using this