Publicidad
WARNING
•
Please make sure to turn off the power before
starting the installation.
•
Installation should only be done by a certified electrician.
•
The light source of this luminaire is not replaceable, when the light
source reaches its end of life the whole luminaire should be replaced.
•
If the external flexible cable or cord of this luminaire is damaged, it shall
be exclusively replaced by the manufacturer or his service agent or a
similar qualified person in order to avoid a hazard.
•
Proper grounding should be ensured throughout the installation.
This marking indicates that this
product should not be disposed of
with other household wastes.
Caution, Risk of electric shock
INSTALLATION DIAGRAM
1
4
INSTALLATION INSTRUCTIONS
1. Switch off the power.
2. Cut appropriate size hole on the wall. Put the rubber plug into the hole and fix the bracket on
the ceiling with screw.
3. Connect the wiring as per the wiring diagram.
4. Install the lamp body into the bracket and tighten the screw safely and solidly.
5. Switch on the power and test.
2
5
Non-replaceable control gear
Non-replaceable light source
3
6
Publicidad
