Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Please read the following information carefully before connecting the programmer to the
mains.
IMPORTANT
Do not use an appliance that exceeds 3680 watts. Make sure that the plug of any
appliance is always inserted into the programmer's socket. If it is necessary to clean the
programmer, unplug it and clean it with a dry cloth. Do not use this device in a humid
room or place (bathroom, washbasin), it should only be used indoors in a domestic
environment (not suitable for professional use: machine tools, medical or safety devices)
START UP
1. Plug the programmer into a household electrical outlet and turn it on.
2. Let the memory backup battery charge for about 5 minutes.
3. After charging, reset the system by pressing the "RESET" button with the provided
needle. Or restore the factory settings by pressing and holding the "
simultaneously for three seconds.
4. Power indicator: The indicator light is on (blue) in the power-on state and off in the
power-off state.
Features
1.Simplified setting buttons, easy operation
2.Standby power consumes <50mw, max load capacity 3680W at 16A
3.Timer can be set for 1min – 23hrs 59min, up to 25 different timers
4.Screen is backlit and turns on when a button is pressed.
5.Meets the CE safety cert, EFT>4KV and EMC anti-interference tests
6.Shock protection cover to protect children or prevent accidental insertions
7.Operating temperature range: -10℃ – 50℃
USER MANUAL
" and "
" buttons
1
Publicidad
