Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Plug the appliance into the mains socket. The appliance will enter the standby state.
Turning ON
Press
to turn the appliance on. Press
Mode switch
Repeatedly press MODE to select the desired working mode: cooling, dehumidification or fan only.
The indicator of your selected mode will illuminate or appear.
Control panel
Setting the temperature
−
+
Repeatedly press
/
to set the temperature.
The display will show the temperature you set in cool (
Adjustable temperature range:
30°C max.
16°C min.
Regulating air flow direction
Move the horizontal louvers directly to
adjust the air flow.
DRAINAGE
Under high humidity conditions it may be necessary to empty the internal water tank. When the internal
water tank is full the display will show "H8" and the indicator
The cooling/dehumidification process will stop.
Before the appliance is turned on, you can insert the rubber plug to the bottom drainage point or attach
the supplied drain hose to the drainage point.
again to enter the standby state.
) mode.
will flash.
7
Publicidad
