Brandson Equipment 306649 Manual Del Usuario página 21

6. Time and alarm setting
Press and hold the "SET" button for approx. 3 seconds to call up the time setting.
1. The 12/24 hour display starts to flash. Press the "+" or "-" button to set.
2. Press the "SET" button to confirm. The hour then flashes. Set the current
hour and press the "SET" button again to confirm.
3. Repeat the process with the minute display.
4. Then set the alarm time, starting with the hour. Then press the "SET"
button to confirm the entry.
5. Repeat the process with the minute display.
6. The setting mode is then exited. You can also save the setting and exit the
setting mode by not pressing any button for about 30 seconds.
6.1 Enabling/disabling the alarm
Press the "SET" button brieflyto switch the alarm function on or off. When the
alarm is switched on, a symbol appears above the time in the display.The alarm
sounds for 1 minute. You can touch the "Snooze" button to activate the snooze
function for 5 minutes. Press any other button on the device to turn off the
alarm and stop the alarm directly.
English
21