TP-Link PSM550-AC Guia De Instalacion página 4

English
Appearance
AC Power Cord
Connector
FAN
Power Supply
Module Handle
Remove the Power Supply Module
1. Remove the power cord from the external power supply system and the power module.
2. Press the Release Handle of the module with one hand, and pull the Power Supply Module Handle using your other hand, until it
completely comes out of the chassis.
Retainer Clips
LED
Release Handle
Install the Power Supply Module
1. Press the Release Handle of the module with one hand, and hold the
bottom of the module using your other hand. Gently push the module
in along the slot guide rail.
2. Release the Release Handle to fix the power supply module in place.
Connect the Power Cord and Connect to the Ground
Connect the device to a power outlet using the provided power cord.
Meanwhile, it will connect to the ground via the power supply.
2
Release Handle