Levenhuk DTX DX50 Guia Del Usuario página 2

Levenhuk DTX DX50
Digital Magnifier
EN
Magnifier parts
Button + (Zoom In)
Button – (Zoom Out)
Color mode
Freeze/Capture/
Confirm button
Power button
Camera switch button
Settings
Button Up
Button Down
Delete
Playback
Charging indicator
5V/USB port
TV-out
HDMI interface
MicroSD card slot
16
Foldable stand
17
The kit includes: portable digital magnifier, MicroSD card 8GB, AC adapter, TV-out cable,
HDMI cable, Type-C USB cable, carrying bag, cleaning wipe, user manual, and warranty.
2
Never, under any circumstances, look directly at the Sun, another bright
source of light or at a laser through this device, as this may cause
PERMANENT RETINAL DAMAGE and may lead to BLINDNESS.
Charging the device
Connect the power cable to the device and the AC adapter via a USB plug and connect
it to the AC power supply to charge the device. When the battery gets charged, the
LED indicator turns off. Unplug the magnifier.
!
Always turn the magnifier off during charging. The battery will not charge if the
magnifier is left on.
Getting started
Press the Power button (5) and hold it for 3 seconds to turn the device on/off.
Installing/removing the memory card
The device supports memory cards class 10 up to 64GB.
• Insert the microSD card into the slot. Make sure the direction is right.
• Do not force the card in.
• Format the microSD card before starting, as it will improve its compatibility with
the device.
• To remove the card from the slot, press the edge of the memory card in gently, and
the card will pop out. Then, remove the card.
!
If the memory card is not installed, a No Card icon will be displayed.
Color Mode selection
Press the Color Mode button to cycle through the magnifier's 7 different color modes
as follows: full color, black on white, white on black, blue on white, blue on yellow,
yellow on black, yellow on blue.
Magnification adjustment
To change the level of magnification, press the button + (1) or button – (2): 2x, 4x, 8x,
16x, 32x.