STEP
4
Select Options
Extra Rinse
When the switch or knob is in the On position, an
additional rinse at the end of the Regular, No Iron
Fabrics and Handwash cycles is provided to more
completely remove laundry additives, suds, perfumes,
etc.
(if desired)
STEP
5
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial in. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed in (off position) when you change the setting.
Note:
Do not attempt to turn the control dial
counterclockwise. Damage to the timer will result.
8