Publicidad
Idiomas disponibles
Idiomas disponibles
4 Technical Notes
Attention!
For the connection with a 30A13, 30A14, 30A15 or 30A16 Single-
Axis-Foot you will need 2 bearing shells together (see Fig. 1a).
Attention!
The tightening torque for the adjusting screws is 6 Nm with the
173P10 Torque Wrench, calibrated (see Fig. 1).
Attention!
Please take special care, that this product is not exposed to corro-
sive chemicals and substances such as salt- and freshwater, acids,
dust or sand! Failure to observe these instructions will make any
claims against Streifeneder ortho.production GmbH null and void.
Please inform your prosthesis wearer accordingly!
Attention!
To eliminate sounds in the cosmetic soft foam cover, use 116P11
Silicone Parting Agent Spray. Do not use talcum powder! Using
talcum powder increases the risk of the patient falling, as talcum
powder withdraws grease from the mechanical components and
therefore function may be inhibited. If the medical product is used
with talcum powder, all claims against Streifeneder ortho.production
are null and void. Spray the116P11 Silicone Parting Agent Spray
directly onto the friction surfaces of the cosmetic soft foam cover.
5 Maintenance and service
Generally, all moveable parts must be inspected visually and for functionality
every 6 months; all non-moveable structural parts every 12 months.
For lubrication of the gliding metal-surfaces of the Adapter we recommend
the 112P37/50 Joint grease Lubricant.
13/28
Publicidad
