Happy Garden ADHARA Guia De Inicio Rapido página 7

ADHARA
LED01
LED lamp
1/ Remove the cap on the lamp to connect the
charger to DC power.
2/ After charging, cover the DC input with the
cap and make sure it is firmly in place to avoid
water ingress.
3/ To switch on the light, press the round white
button, the last mode selected will be activated.
To change the light colour and mode, press the
same button again.
4/ To switch off, press and hold the round white
button for 3 seconds.
Remote control
- Before using the remote control, remove the small plastic cover from the battery.
- If the remote control fails to switch on the light, replace the battery with another one.
- Remove the old battery by pressing the tab on the side of the battery cover, then sliding the cover off
the remote control.
Pay attention to the direction of the battery (+ and -), and make sure that the new battery is inserted
in the correct direction and dispose of the old battery responsibly.
Long press to increase the speed of
colour change in Flash mode.
Short press to increase brightness.
Long press to decrease the speed of
colour change in Flash mode.
Short press to decrease brightness.
Fixed colour selection x16
Warning: recharge only with 5V DC.
On
Off
Flash transition
Regular transition
Fade transition
Smooth transition
7