Maintenance; Technical Parameter - d2itsu AUD 90 Manual De Funcionamiento

Operation
1- Turn on the power switch
Set the switch on Hi or Lo position with your hand or telecontroller
2-
Adjust the grate to obtain the best effect
3-
10°
Angle adjustment screw
Disconnect power source before unit operation, routing maintenance must be done every year.
1-
2- Use the unit at the rated voltage and frequency indicated on the nameplate.
3- Never use petrol, benzene, thinner or any other such chemicals for clearing the air curtain.
4- Do not allow water enter the motor.
When power supply comes from socket, the plug must accord with IEC335-1. When the power cord is connected with charging line directly, all pola-
5-
rity switch that the contact gap is 3 mm at least must be installed in the charging line.
Frequency
MODEL
Voltage V
Hz
AUD 90
50/60
AUD 120 50/60
24

MAINTENANCE

Wall mounting
plate (accessory)
Strong wind
CAUTIONS

TECHNICAL PARAMETER

Max input
Length
power W
Diameter of
of body
wheel mm
mm
Hi
900 130 120 1400 1050
220 136
220 136 1200 160 145 1760 1680
Angle adjustment screw
Air volume
m 3
Air Velocity
Noise dB
m/s
Lo Hi Lo
51-52 8,5-11
53-54 8,5-11
Wall mounting
plate (accessory)
Breeze
Net
weight Dimension mm
Kg
11,2 900x220x157
14,5 1200x220x157