Taurus AIR FRY DIGITAL 360 Instrucciones De Uso página 8

EN English (Original instructions)
AIR FRY
AIR FRY DIGITAL 360
DESCRIPTION
A Frying tray
B Frying pot
C Handle
D Air inlet
E Control panel
F Top heating element
G Bottom heating element
H Air outlet
I Main body
J Supply cord
CONTROL PANEL
1. Pre-heat program
2. Temperature selector buttons
3. French fries program
4. Meat program
5. Display
6. Drumsticks program
7. Steak program
8. Time selector buttons
9. Pause/Start
10. Cake program
11. Shrimps program
12. Fish program
13. Chicken program
14. Vegetables program
15. On/Off
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.
USE AND CARE
• Fully extend the appliance's supply cord before each use.
• Do not use the appliance if the parts or accessories are
not properly fitted.
• Do not use the appliance if the accessories attached to it
are defective. Replace them immediately.
• Do not use the appliance when empty.
• Do not fill the pot with oil.
• Do not move the appliance while in use.
• To keep the non-stick treatment in good condition, do not
use metal or pointed utensils on it.
• Disconnect the appliance from the mains when not in use
and before undertaking any cleaning task.
• Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
• Do not store or transport the appliance if it is still hot. Let
it cool down for approx. 30 min.
• Never leave the appliance connected and unattended if
it is not in use. This saves energy and prolongs the life of
the appliance.
• Use only utensils appropriate to support high
temperatures.
• As a reference, in the annexed table, you will find a
recommendation on the cooking temperature and time for
several meals.
INSTRUCTIONS FOR USE
BEFORE USE
• Make sure that the entire product's packaging has been
removed.
• Please read the "Safety advice and warnings" booklet
carefully before first use.
• Before using the product for the first time, clean the
parts that will come into contact with food in the manner
described in the «Cleaning» section.
USE
• Unroll the supply cord completely before plugging it in.
• Place the appliance on a horizontal, level and stable
surface.
• Connect the appliance to the mains.
• Take the fry pot (B) out of the fryer carefully.
Note: Manipulate the fry pot using the handle (C). Don't
touch the fry pot when it's hot.
• Put the ingredients you want to fry inside the pot.
• Introduce the fry pot inside the fryer.
• Turn the appliance on by pressing the on/off button.
• Choose the desired program clicking on it. You will see
the temperature and the time of this program on the
display (5).
• Once you've done it, you can adjust the temperature with
the increase/decrease temperature selector buttons (2).
• Note: Default temperature is 180 ºC but you can set the
temperature from 50 ºC to 200 ºC.