Be Cool BC18ST2402 Instrucciones De Uso página 134

Preparation
•
Estimated assembly time: 30 minutes
•
Required tools for assembly: Phillips screwdriver (not included).
Assembly
Open the packaging and take out all the parts.
(1) Adjust the steel tube to the
desired height, tighten the screw
and remove the screw at the bottom
of the steel tube with a screwdriver.
(2) Insert the steel tube into the steel
tube hole of the stand.
(3) Use a screwdriver to fix the lower
screw previously removed.
(4) Turn the upper and lower column cylinders anticlockwise and tighten them.
Note: When assembling and disassembling, the connecting tube should be
screwed down to prevent damage to the motor. The vertical swivel function
cannot be adjusted manually to avoid damage to the swivel structure.
Remote control
Preparing the remote control - Inserting or replacing the
battery
Please follow the instructions below:
Initial operation:
To operate the remote control for the first time, please pull
out the plastic protector from the battery compartment on the
back of the remote control.
Change battery:
Pull out the battery holder on the back of the remote control
and remove the old battery from the holder:
134