Farfisa SE4000 Manual Del Usuario página 7

VIDEOINTERCOM START-UP.
Supply power to the system. The videointercom receives power via PoE. If you choose to connect the device to the network
via Wi-Fi or when the system configuration requires it, it is possible to supply power locally to the videointercom using the
transformer item PRS210 (not supplied), which requires the presence of a 230 Vac power supply. For configuration and,
in the case of "distributed" systems, for operation of the videointercom, it is required to be connected to the Internet via
network cable (LAN), connected to its own router or via a Wi-Fi network. If the connection is via network cable, connect
the latter to the videointercom using the input port on the rear. In order to proceed with the installation and configuration,
as well as to set the parameters for the Wi-Fi connection, it is necessary to download and install the IP EVO application
available for iOS and Android on your smartphone. To download IP EVO you can scan the following QR-codes:
CONFIGURATION VIA THE IP EVO APP BY THE INSTALLER
Once the IP EVO application has been downloaded and installed on your mobile device, your smartphone can be used as
a tool for configuring videointercom: through which you can set parameters such as connection mode, add users and the
procedure for sending connection invitations. Proceed as indicated in the following steps:
Installer user registration
After installation of the app, the first step is to register the installer user by providing an email address and setting an
access password that meets the indicated security criteria. At this point, a control and verification code is sent to the pre-
viously provided email address, which must be entered in the box provided by the app.
Adding the videointercom and Internet connection
In order to operate the videointercom remotely as well and be able to receive the call, you must pair the videointer-
com with your housing unit. Log in using the installer credentials you have just registered. In the Welcome screen that
will be displayed click on the option related to the beginning of the installation procedure at the bottom of the page
or on the button related to the addition of a new system (in the case of a later addition) and scan the QR code, which
will be shown by the display of the new videointercom, or in the case of restoration, after choosing the language.
iOS Android
Mi 2599 - 7 -