Hkoenig warm110 Manual De Instrucciones página 5

PART DESCRIPTION
A. Handle
B. Thermostat control
C. Power setting switch
D. Castor
E. Body
OPERATING YOUR OIL FILLED HEATER
Place the heater on the floor at least 90cm away from the wall and any other objects
1
such as furniture, Curtains or plants.
(Make sure the power supply used corresponds to the one on the rating label)
2
With the thermostat control switch in the"O" position and the power setting switches in
3
the "OFF" Position; plug the heater into the main power supply.
Be careful not to move your radiator when it is hot to avoid any risk of burns.
4
OPERATION
1 Room temperature can be adjusted using the thermostat. Simply turn the thermostat knob
clockwise, to increase the heat, and anti-clockwise to decrease the temperature, until you
reach the desired temperature.
2 The power switch lights up when activated.
3 Turning the thermostat control clockwise will increase the "set" temperature.
4 Turning the thermostat anti-clockwise will decrease the "set" temperature.
5 Do not cover the heater at any time during operation. There is a risk of fire if the heater is
covered.
6 Once you have finished using your heater.,turn the power switches off, and the thermostat
control switch to the "0"positions.,and unplug from the mains supply.