Publicidad
Idiomas disponibles
Idiomas disponibles
Milkshake Maker_______
USER INSTRUCTIONS
1.
Place your ingredients into the stainless steel cup. Please note that there are
indentations on the cup that show a minimum height and a maximum height for your
ingredients. If the minimum height is not reached the mixing shaft will not be able to
work properly. If the ingredients go past the maximum height indentation the
ingredients may overflow while mixing.
2.
Place the cup under the top support clip and let it rest on the bottom rest clip.
3.
Make sure the power switch is OFF, plug the power cord into an electrical outlet, and
switch to LOW (1). After 10 seconds you can switch to HIGH (2) if needed.
4.
If you are using very hard ice cream or if the shake is very thick you may carefully
remove the cup from the support and rest clips, and with the mixing shaft still
submerged in the shake, move the cup around slightly for more thorough mixing.
5.
When finished, switch the power to OFF, remove the cup (using the tilt head feature if
needed) and pour your shake into a glass to serve.
6.
Unplug the milkshake maker when not in use.
CLEANING AND MAINTENANCE
1.
When performing any cleaning or maintenance to this unit, be sure to unplug from
power outlet first.
2.
Wipe the outer surface of the milkshake maker base with a warm damp cloth and dry
with a soft cloth.
3.
Remove the mixing shaft as specified earlier and hand wash in warm soapy water and
dry thoroughly before replacing the mixing shaft into the tilt head.
4.
Do not immerse the base in water or any other liquid.
5.
It is recommended that you hand wash the stainless steel cup but you can use the top
rack of the dishwasher if needed.
6
888-367-7373
___
USER INSTRUCTIONS & CLEANING AND MAINTENANCE
AFTER SALES SUPPORT
customer-service@wk-usa.com
Publicidad
