Publicidad
Idiomas disponibles
Idiomas disponibles
B) BATTERY CHARGE
Before using the product, charge the battery for 6 to 8 hours by :
Charge the light using the USB cable supplied, which is compatible with any computer or 5-volt mobile
phone output charger.
Connect the USB cable to the computer's USB port Insert
the USB cable into the lamp's micro socket
Monitor the charging indicator (it will turn green when fully charged).Cover the charging cap after it is
fully charged.
C) REMOTE CONTROL OPERATION
OPERATION - 8-BUTTON REMOTE CONTROL
Remove the plastic sheet protruding from the battery compartment so that you can use the remote
control.
ON - switches the light on
OFF - turns the light off
COLOUR - freezes the light on red, green, blue, orange,
white, pink or violet
PLAY/PAUSE - play the light of one colour slowly fading into
the next - press
a pause on any colour
BRIGHT - lets you dim or brighten the light CANDLE - creates a flickering yellow-orange light to
resemble a candle
WHITE LAMP - freezes the light on the white colour SPEED - lets you speed up or slow down colour
changes in playback mode.
Environmental protection
The symbol on the product indicates that used electrical products must not be disposed of with
household waste. Please recycle where facilities exist. Check with your local authority or retailer for
recycling advice.
Care and maintenance
1.
Always switch off the light after use.
2.
for battery, operating temperature
Charging: 0 ~ 45°C (Charging at a very low temperature, such as blown 0°C, will result in a lower
capacity and reduce the life of the battery) Long-term storage temperature: 0~25°C
Do not store for more than six months, must be charged once when stored for three months.
Publicidad
