Metra 95-8273B Instrucciones De Instalación página 3

1. Attach the brackets to the radio using
the screws supplied with the radio and
mount into the dash opening. (Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
3. Snap the radio trim panel over the new
radio and reassemble dash in reverse
order of disassembly. Note: It is best to
connect the factory vent assembly to
the radio housing trim panel prior to
installation.
KIT ASSEMBLY
(Figure A)
3
REV. 4/10/2024 INST95-8273B