Publicidad
Idiomas disponibles
Idiomas disponibles
D
1509)50-4
Water in your home
Water hardness varies according to where you live. If the water in your home is
hard, without water softening, incrustations would form on your dishes. Your
dishwasher is fitted with a water softener which uses special salt to get rid of
limescale in the water.
Loading the salt.
Always use salt which is intended
for dishwasher use.
The salt container is situated
underneath the lower rack, fill it
up as follows:
1.Pull out the lower rack
completely, unscrew and
remove the container cap
2. Is it the first time you load the
salt? First fill the container up
with water (you won't have to
do this again next time)
3. Put the dishwasher funnel on
the hole and pour in
approximately two kilos of salt.
It is normal that some water
comes out of the container.
4. Screw the cap back in place
carefully.
Suggestions and advice for you.
How to look after and protect
the dishes you hold dear
I Almost all silverware can be
cleaned in a dishwasher.
There are two exceptions: old
silverware and silverware
decorated with an oxidising
agent. Hot water can loosen
the handles on old silverware
ad wear off the decorations on
the other.
Never let silverware come into
contact with other metals: you
will thus avoid stains and
blackening
Apart from
making you save
time and energy,
your dishwasher
disinfects your
dishes, washing
them at a high
t e m p e r a t u r e .
18 ARISTON DISHWASHER - Instructions for installation and use
Never without salt
When should I load the
salt?
The salt container should be filled
up when the low salt indicator light
"S" flashes. Your appliance will re-
mind you to do so for 5 consecu-
tive wash cycles.
Salt adjustment
Your dishwasher can adjust its salt
consumption according to the hard-
ness of the water in your home.
This way, you can optimise and
customise your dishwasher's salt
consumption (not too much, nor too
little).
To adjust salt consumption, do
as follows:
1. Unscrew the salt container cap
2. There is an arrow on the neck
of the container (see figure): if
necessary, turn the arrow anti-
clockwise from the "-" setting
to the "+" setting.
Select the arrow position
depending on the water
hardness, referring to the table
provided.
I Silver plates and serving dishes
should be washed immediately
after use, especially if they have
contained salt, eggs, olives,
mustard, vinegar, fruit juices
and cooked vegetables.
I For particularly delicate dishes,
we recommend you use the
specific wash cycle offered by
your dishwasher.
Selector
Hardness of the water
position
°dH
°fH
°mmol/l
0 - 10
0 - 17
0 - 1.7
10 – 25
18 – 44
1.8 – 4.4
25 – 50
45 – 89
4.5 – 8.9
> 50
> 89
> 8.9
Savings are easy
Using your electric household appliances
wisely helps you make savings and is
good for the environment.
Maximum load.
To optimise consumption levels, try to use the
dishwasher with a full load only. If it takes
quite some time to fill up your dishwasher,
use the soak cycle to avoid the formation of
bad odours and caked-on food.
The right wash cycle.
Select the most suitable wash cycle for the
type of load you have placed in the
dishwasher. The choice of wash cycle depends
on the type of dishes to wash and on how
dirty they are. To select the right wash cycle,
please consult the wash cycle table on page
1 7 .
To prevent rust
from forming, load
the salt just before
beginning a wash
c y c l e .
Salt
Autonomy
knob
consumption
(cycles/2 kg)
(grams/cycle)
/
0
-
20
MED
40
+
60
You don't know
how hard the
water in your
home is? Ask the
company that
supplies water in
your area.
/
60
40
25
Publicidad
