Baby Trend Sit N'Stand Double 2.0 SS28 A Serie Manual De Instrucciones página 13

Idiomas disponibles

To Recline Seats

WARNING:

used only for a child that is at least 6 months old.

To recline the seat press the clip ends

together to release and pull down

(Fig. 11a).

To place seat into an upright position,

press the clip ends together while

holding the end of strap. Push clip

upwards to secure into desired

position (Fig. 11b).

NOTE: Repeat the step above to

recline the rear seat. Adjust the

safety strap as needed.

Reclined

The upright position should be

Fig. 11a

Upright

Fig. 11b

Infant Car Seat

WARNING:

sliding out, always use the Infant Car Seat harness.

Infant car seat(s) sold separately

(visit babytrend.com for compatibilty chart)

ATTENTION: CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO

Dual Infant Car Seats must each attach into the connectors of the

strollers front and rear seats.

any dual seating combination, both seats must have weight in them.

Always sit the 2 children at the same time.

Single Infant Car Seat must attach to the front seat connectors only.

This feature requires child tray and seat back adjustment to the most

reclined position. Canopy adjustments must be done accordingly.

NOTE: To make seat position adjustments refer to step 11.

DO NOT use a single car seat in the

rear seat position. DO NOT use the rear

seat without fabric installation.

Avoid serious injury from falling or

IMPORTANT: For use of two car seats or