Descargar Imprimir esta página

Genesis GLGBS20B Manual Del Operario página 6

Sopladora/barredora de 2 velocidades de 20v

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
product is switched off and the battery is disconnected
before adjusting, adding accessories, or checking a
function on the product.
INSTALLING FRONT AND BACK
NOZZLES (FIG 2)
2b
4a
4
1.
Align the slot (2a) on the back nozzle with the spring
locking button (6) on the motor housing. Slide the back
nozzle (2) onto the motor housing until it securely locks
in place with a click.
2.
Slide the front nozzle (4) onto the back nozzle (2) until
the slot (4a) on the front nozzle clicks onto the locking
indent (2b) on the back nozzle.
PRODUCT OVERVIEW
5
4
ASSEMBLY AND ADJUSTMENTS
Always be sure that the
6
2a
2
FIG 2
2
FIG 1
INSTALLING AND REMOVING THE
BATTERY PACK (FIG 3)
• To install the battery pack, slide the battery pack (3) into
the bottom of the handle all the way until it locks in
place with a click, as shown in FIG 3. Lightly pull on
the battery to ensure it is locked into place and will not
accidentally fall out of the tool, causing an injury.
• To remove the battery pack, pull the battery away from
the blower while depressing the battery locking tab (3a).
ENGLISH
1
3
1. Switch
2. Back Nozzle
3. Battery Pack
4. Front Nozzle
5. Charger
3
FIG 3
3a

Publicidad

loading