Publicidad
Idiomas disponibles
Idiomas disponibles
MIX OUTPUT
19
Balanced line output with male 3-pin XLR socket. The outgoing signal consists of a mix of all input channels
plus effect and Bluetooth signal and is independent of the overall volume setting.
USB-C
20
USB-C socket for charging a smartphone or tablet (5 volts voltage, maximum 2 A charging current).
OPERATION
NOTES
As soon as the speaker is switched on (with sufficient battery status or power supply via mains cable),
the LD Systems logo appears in the display for a short time. All settings, such as preset, EQ and effect,
are loaded as they were set before the speaker was switched off. After this process, the speaker is
ready for operation.
MAIN DISPLAY
In normal operation, the main display is activated and shows the set overall volume, the activated
speaker preset, the effect preset, the input levels of channels 1 to 6, the Bluetooth and TWS status and
the battery charge status (see illustration).
Loudspeaker preset
Effect preset
Peak
Level
PEAK INDICATOR
If the peak symbol appears in the level display of a channel, this indicates that the input stage of the
corresponding channel is operated above the distortion limit. Reduce the output level of the connected
playback device (e.g. mixer, keyboard, etc.) until the peak symbol is no longer displayed and the
loudspeaker plays back audio signals without distortion.
No symbol: TWS deactivated
Symbol flashes: TWS activated,
ready for coupling
Symbol permanently present:
TWS activated and coupled
PRESET: MUSIC
FX: SMALL REVERB -20dB
Input level with peak indicator of channels 1 to 6
PRESET: MUSIC
MAIN VOLUME
PRESET: MUSIC
HOME
BLUETOOTH
AUDIO
EFFECT
SETTINGS
No symbol: Bluetooth deactivated
Symbol flashes: Bluetooth activated,
ready to pair
Symbol permanently present:
Bluetooth activated and paired
Battery charge status
Main volume
-20 dB
PRESET: MUSIC
BLUETOOTH
TWS
MAIN MENU
OFF /
OF
17
Publicidad
